Gaerte Micro Motors
Gaerte Micro Motors
Gaerte Micro Motors
Home About Us Products Our Drivers Contact Us Racing Links Yoshimura


Gaerte Micro Motors has brought to you the absolute best fuel management system for the money!!!

Contact Us (260) 357-9231

After working as a race engineer at Yoshimura R&D for six years and helping Mat Mladin bring home his first 3 AMA Superbike championships, Ammar Bazzaz decided to start Bazzaz Performance, ultimately with the goal of bringing this same technology and knowledge to the average racer and motorcycle enthusiast.

Gaerte Micro Motors is your dealer for all Bazzaz systems. The ZFI will control all 8 injectors for the same price as a Powercommander that controls 4. With the ZAFM you get self tuning this unit will not only tell you where you need to make changes to your fuel map but it will change the map for you! Thatís not all DUAL MAPPING!! Thatís right you can hold two diff. fuel maps in the ZFI with the flip of a switch you could change maps to cool down an engine or revert to a base map! Give us a call today to order your last engine management system.

Gaerte Motors
Micro Sprint Valve Covers
Gaerte Motors
Gaerte Micro Motors
Gaerte Micro Motors
Gaerte Micro Motors
Gaerte Micro Motors
Gaerte Micro Motors
Gaerte Micro Motors
Gaerte Micro Motors
Gaerte Micro Motors
Suzuki GSXR 600
Gaerte Micro Motors
Gaerte Micro Motors

Guhl Injection

Injection Conversion
Wiring Harness Mods
Billet Oil Pans & Custom Pick-Ups

Headers
Titanium Brake Rotors
Custom Engine Mounts


Tired of getting tired? Gaerte Micro Motors has the answer !!Electric power steering!! No fluids easy to install just add power!

Call us for more details (260) 357-9231

Gaerte Micro Motors again adds to its line of the best product available!

!!MADE IN THE USA!! The RLC dash is the best data acquisition system in the world for the money! COLOR display, SUNLIGHT only makes it brighter, a dash YOU CAN READ, FLASH DRIVE transfers “no cable”, TOUCH SCREEN operation, FULL SCREEN warning, and GPS track mapping included.

Visit http://rlc.com/RLC_Racing_Web_Site/video.htm for demo video let the video load 100% before playing if you have slow internet.

Call us today to order your last dash (260) 357-9231

Gaerte Micro Motors

We offer all Yoshimura Products

Stage 1

Yoshimura adjustable cam sprockets
Head gasket  (0.50mm)
OEM Suzuki gasket /seal set: Complete OEM gasket kit, main and rod bearing set, valve guide seals, oil filter.
If additional OEM components are necessary, they will be invoiced at retail prices.

Description of labor services for Stage 1:

Decarbon combustion chamber, intake and exhaust ports, and valve job.
Confirm valve spring tension, and condition of associated components prior to reassembly.

Machine head gasket surface:
Mill head gasket surface to optimize compression ratio. (for classification).

Top End Assembly:
Confirm piston / squish tolerances.
Set valve lash.
Confirm intake and exhaust camshaft timing.
Confirm valve to piston tolerances.

Blue Print Bottom End:
Disassembly of crankshaft and rods, re-size main and rod bearings.
Inspection of transmission, and shift mechanism.
Clutch assembly inspection.
Oil and water pump inspection.
Inspect cam chain tensioning devices.
Inspect condition of piston / ring/ and wrist pin. Confirm piston / cylinder clearances

Stage 2

Yoshimura ST-R Camshafts
(includes adjustable sprockets)
Head gasket  (0.50mm)
Valve cottor set
Valve spring retainer set

Description of labor services for Stage 2

Stage 2 Porting:
 Blend valve seats to cylinder head, intake manifold blending , light port shaping,  valve job.
Confirm valve spring tension, and condition of associated components prior to reassembly.
Machine head gasket surface:
As per stage 1 kit
Top End Assembly:
As per stage 1 kit
Blue Print Bottom End:
As per stage 1 kit

Stage 3

Yoshimura ST-R Camshafts
(includes adjustable sprockets)
Valve cottor set
Valve spring retainer set
JE custom piston kit (+2mm)
REM processing on rods
Crankshaft polish / balance
Cylinder block bore and re-plate

Stage 3 Porting:
Full port / polish. Reshape both intake and exhaust port to optimize performance.
Reshaping of combustion chamber. Valve job.
Confirm valve spring tension, and condition of associated components prior to reassembly.

Machine head gasket surface:
Same as Stage 1 package

Top End Assembly:
Same as Stage 1 package

Blue Print Bottom End:
Same as Stage 1 package

Copyright 2014 - Gaerte Micro Motors - GoGaerte.com